Computers and Control Systems: Technical Service Bulletins

• Customer Interest
  • A/T - 41TE/AE 42LE Delayed Gear Engagement
    • Overview
    • Symptom/Condition
    • Diagnosis
    • Item 1 DTC 35 Loss of Prime
    • Item 2 L - R Inner and Outer Seals
    • Item 3 UD Inner Lip Seal
    • Item 4 General Seal Statement
    • Item 5 Measuring # 1 Check Ball Clearance
    • Item 6 PRNDL Switch (Non TRS)
    • Item 7 Output Speed Sensor
• By Symptom
  • Customer Interest
    • A/T - 41TE/AE 42LE Delayed Gear Engagement
      • Overview
      • Symptom/Condition
      • Diagnosis
      • Item 1 DTC 35 Loss of Prime
      • Item 2 L - R Inner and Outer Seals
      • Item 3 UD Inner Lip Seal
      • Item 4 General Seal Statement
      • Item 5 Measuring # 1 Check Ball Clearance
      • Item 6 PRNDL Switch (Non TRS)
      • Item 7 Output Speed Sensor
  • No shift/Incorrect gear engagement
    • A/T - 41TE/AE 42LE Delayed Gear Engagement
      • Overview
      • Symptom/Condition
      • Diagnosis
      • Item 1 DTC 35 Loss of Prime
      • Item 2 L - R Inner and Outer Seals
      • Item 3 UD Inner Lip Seal
      • Item 4 General Seal Statement
      • Item 5 Measuring # 1 Check Ball Clearance
      • Item 6 PRNDL Switch (Non TRS)
      • Item 7 Output Speed Sensor
• All Technical Service Bulletins
  • A/C - Evaporator Freezes Up/Lack Of Cooling
  • Engine Controls - Flash Programming Failure Recovery
    • Overview
    • Connected/Disconnected Flash Mode Using TechCONNECT
    • Pay Attention While Performing Flash Reprogram Procedures
    • Error Messages
    • Enhanced and Original Abort Recovery
    • Enhanced Abort Recovery Screens
    • Original Abort Recovery Screen
    • Programmable Modules
    • Powertrain Modules - Engine and Transmission
  • Electrical - Pin Out and Graphics Revisions
  • Auto Computers - Y2K Effects
  • MDS/DRB III - Usage Information
  • A/T - 41TE/AE 42LE Delayed Gear Engagement
    • Overview
    • Symptom/Condition
    • Diagnosis
    • Item 1 DTC 35 Loss of Prime
    • Item 2 L - R Inner and Outer Seals
    • Item 3 UD Inner Lip Seal
    • Item 4 General Seal Statement
    • Item 5 Measuring # 1 Check Ball Clearance
    • Item 6 PRNDL Switch (Non TRS)
    • Item 7 Output Speed Sensor
  • Transmission Range Sensor - Production Change