Van Conversion Relay

Circuit A12 from the van conversion relay is powered when the ignition switch is in the ACCESSORY or RUN position. The relay provides a power source for aftermarket accessories.

When the ignition switch is in the ACCESSORY or RUN positions it connects circuit Al from fuse 7 in the Power Distribution Center (PDC) with circuit A31. Circuit A31 connects to the fuse block and powers circuit L5 through fuse 12. Circuit L5 splices to the coil side of the van conversion relay Circuit Z1 provides ground for the coil side of the relay.

When battery voltage is present on the circuit L5, the relay contacts close and connect circuits A18 and A12. Circuit A18 from 60 amp fuse 8 in the PDC supplies battery voltage to circuit A12.