Seat Potentiometers

CIRCUIT OPERATION
The power seat control module receives an input on the seat position from the potentiometers located near the seat motors. The control module supplies 5 Volts to the potentiometers on circuit P29. The control module also supplies a ground path for the potentiometers on circuit P28.

There are four potentiometers used in this system and each supplies a different input to the control module. Circuit P26 provides the input for the front up/down motor. Circuit P27 is used for the rear up/down motor.

Circuit P25 is used for the horizontal forward/rearward motor. Circuit P47 is used for the recliner motor.