Antenna Mast and Cable Lead

Antenna Cable:

REMOVAL
1. Remove glove box from instrument panel.
2. Disconnect antenna cable connector from extension cable.
3. Remove right kick trim panel.
4. Disengage rubber grommet insulator from door hinge pillar.
5. Pull antenna cable through hinge pillar into open between door hinges.
6. Hoist and support vehicle on safety stands.
7. Remove front wheel.
8. Remove front wheelhouse splash shield.

Antenna Mast:

9. Slide the plastic sleeve up on antenna mast for access to mast. Remove antenna mast from antenna base.

Antenna Cap Nut Remove/Install - Typical:

10. Remove plastic cap from the cap nut. Using cap nut tool, remove cap nut holding antenna base to front fender.
11. Remove antenna base from under front fender.

INSTALLATION
1. Install antenna base from under front fender.
2. Install plastic cap from the cap nut. Using cap nut tool, remove cap nut holding antenna base to front fender.
3. Slide the plastic sleeve down on antenna mast for access to mast. Install antenna mast from antenna base.
4. Install front wheelhouse splash shield.
5. Install front wheel.
6. Hoist and support vehicle on safety stands.
7. Push antenna cable through hinge pillar into open between door hinges.
8. Engage rubber grommet insulator from door hinge pillar.
9. Install right kick trim panel.
10. Connect antenna cable connector from extension cable.
11. Install glove box from instrument panel.