Parking Brake System: Service and Repair

The content of this article reflects changes called for in TSB 26-05-98.

PARKING BRAKE AUTO ADJUSTER MECHANISM

Releasing Auto Adjuster
1. With the parking brake pedal in its released position, reach under the vehicle on the drivers side and pull rearward on the front cable creating slack. Secure the front cable in this position by grasping the cable with locking pliers and locking them in place just past the second outrigger bracket (in front of the equalizer bracket).
2. Remove the front parking brake cable from the equalizer bracket.
3. Release the locking pliers. The cable will move a short distance until the adjuster meets its stop.

Engaging Auto Adjuster
1. Repeat step 1 under Releasing Auto Adjuster.
2. Connect the front parking brake cable to the equalizer bracket.
3. Remove the locking pliers.
4. Apply and release parking brake pedal 1 time. This will seat the parking brake cables.