Installation

1. Be sure the air seals are in position before radiator is installed. Slide radiator down into position behind closure panel. Seat the radiator with the rubber isolators into the mount holes provided, with a 10 lbs. force.
2. Install filter/dryer and mounting bracket onto fan module.
3. Install Air Conditioning Condenser onto the radiator.
4. Unplug and connect automatic transmission oil cooler lines to radiator
5. Install inlet and outlet radiator hoses (including coolant reserve hose) and connect the fan motor electrical connection.
6. Install air cleaner assembly.
7. Install the upper radiator closure panel crossmember.
8. Install the upper radiator mounting screws. Tighten radiator mounting bolts to 12 Nm (105 inch lbs.). Connect the engine block heater wire if equipped.
9. Install the Coolant Recovery System (CRS) tank retaining screw to the upper radiator closure panel crossmember.
10. Install air intake resonator.
11. Fill cooling system.
12. Connect negative battery cable.