Radio/Tape/CD Player

Radio:

REMOVAL
1. Remove HVAC switch bezel.
2. Remove screws holding radio to instrument panel.

Radio Connectors:

3. Pull radio rearward to gain access to back of radio.
4. Remove bolt holding ground strap to back of radio.
5. Disconnect antenna cable from back of radio.
6. Disconnect the wire connectors from back of radio.
7. Remove radio from vehicle.

INSTALLATION
1. Install radio from vehicle.
2. Connect the wire connectors from back of radio.
3. Connect antenna cable from back of radio.
4. Install bolt holding ground strap to back of radio.
5. Push radio forward to gain access of radio.
6. Tighten screws holding radio to instrument panel.
7. Install HVAC switch bezel.