Mirror Potentiometers

CIRCUIT OPERATION
The power mirror control module receives an input on the mirror position from the potentiometers located in the mirrors.

There are four potentiometers used in this system, two in each mirror. Each supplies a different input to the control module. Circuit P67 provides the input for the right mirror vertical position. Circuit P68 is used for the right mirror horizontal position. Circuit P66 is used as the ground from the right mirror to the control module.

Circuit P64 is used for the left vertical position. Circuit P65 is used for left mirror horizontal position. The P69 circuit is used as the ground from the left mirror to the control module.