Liftgate Key Cyl Disarm SW Failure

Name of Code:
Liftgate Key Cyl Disarm Sw Failure

When Monitored:
Anytime battery voltage is above 10 volts and BCM is awake.

Set Condition:
The BCM senses a voltage of 2.0 volts (+/-25OmV) on the liftgate switch MUX circuit for longer than 8 seconds.

Theory of Operation:
The BCM interfaces with the power door lock, unlock, arm and disarm switches via a single wire circuit (Door Switch MUX) for each door zone. Each zone functions independently of each other. Each switch inside the door has a unique resistance value which when activated sends a voltage level to the BCM. The BCM will interpret the different levels and perform the desired function.

Possible Causes:
- Shorted liftgate key cylinder switch
- Body control module