Undeployed Module

REMOVAL
1. Disconnect battery negative cable. Allow at least two minutes for the reserve capacitor in the ACM to discharge.
2. Remove instrument panel top cover.
3. Remove right front instrument panel speaker.
4. Remove glove box.
5. Disconnect yellow wire connector from passenger airbag.
6. Remove bolts attaching forward airbag mount to the instrument panel
7. Through access holes in instrument panel above glove box opening, remove screws holding air-bag to back of panel.
8. Remove screws attaching airbag to instrument panel cover.
9. Remove airbag from instrument panel.

INSTALLATION
For installation, reverse the above procedures. Do not connect battery negative cable. Refer to Testing and Inspection/Procedures for Airbag System Test procedures.