Dome Lamp: Service and Repair

REMOVAL

Dome/Cargo Lamp:

1. Unsnap the dome lens from the bezel.
2. Remove the bezel screws from the roof cross member brackets.
3. Detach the bulb holder tabs from the bezel.
4. Remove the bezel.

INSTALLATION
1. Position the dome/cargo lamp bezel in the headliner opening. Insert the bulb holder tabs in the bezel.
2. Align the bezel screw holes with the bracket screw holes.
3. Install the bezel screws in the brackets. Tighten the screws to 4 Nm (35 in lb) torque.
4. Install the lamp lens.