Tightening Specifications

5.2L ENGINE

DESCRIPTION TORQUE

Adjusting Strap
Bolt 23 Nm (200 in. lbs.)
Camshaft Sprocket
Bolt 68 Nm (50 ft. lbs.)
Camshaft Thrust Plate
Bolts 24 Nm (18 ft. lbs.)
Chain Case Cover
Bolts 41 Nm (30 ft. lbs.)
Connecting Rod Cap
Bolts 61 Nm (45 ft. lbs.)
Crankshaft Main Bearing Cap
Bolts 115 Nm (85 ft. lbs.)
Crankshaft Pulley
Bolts 24 Nm (210 in. lbs.)
Cylinder Head Bolts
Step 1 - Initial 68 Nm (50 ft. lbs.)
Step 2 - Final 143 Nm (105 ft. lbs.)
Cylinder Head Cover
Bolts 11 Nm (95 in. lbs.)
Exhaust Manifold to Cylinder Head
Bolts/Nuts 34 Nm (25 ft. lbs.)
Flywheel
Bolts 75 Nm (55 ft. lbs.)
Front Engine Mount Bracket to Block
Bolts 81 Nm (60 ft. lbs.)
Front Engine Mount
Through Bolt/Nut 68 Nm (50 ft. lbs.)
Generator Mounting
Bolts 41 Nm (30 ft. lbs.)
Intake Manifold
Bolts Refer to Intake Manifold Service and Repair.
Oil Pan
Bolts 24 Nm (215 in. lbs.)
Oil Pan Drain Plug
Plug 34 Nm (25 ft. lbs.)
Oil Pump
Bolts 41 Nm (30 ft. lbs.)
Oil Pump Cover
Bolts 11 Nm (95 in. lbs.)
Rear Mount Insulator to Support Bracket
Nuts 47 Nm (35 ft. lbs.)
Rear Mount Insulator to Crossmember
Nut 47 Nm (35 ft. lbs.)
Rear Support Bracket to Transmission
Bolts 102 Nm (75 ft. lbs.)
Rocker Arm
Bolts 28 Nm (21 ft. lbs.)
Spark Plugs
Plugs 41 Nm (30 ft. lbs.)
Starter Mounting
Bolts 68 Nm (50 ft. lbs.)
Thermostat Housing
Bolts 25 Nm (225 in. lbs.)
Throttle Body
Bolts 23 Nm (200 in. lbs.)
Torque Converter Drive Plate
Bolts 31 Nm (270 in. lbs.)
Transmission Support Bracket
Bolts 102 Nm (75 ft. lbs.)
Transmission Support Spacer to Insulator Mounting Plate - (4wd)
Nuts 204 Nm (150 ft. lbs.)
Vibration Damper
Bolt 183 Nm (135 ft. lbs.)
Water Pump to Chain Case Cover
Bolt 41 Nm (30 ft. lbs.)