Instrument Cluster Bezel Replacement

REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the cup holder. Refer to: "Instrument Panel, Gauges and Warning Indicators : Instrument Panel : Service and Repair" Service and Repair
3. Remove the ash receiver.

Cluster Bezel Remove/Install:

4. Carefully pry the bezel away from the instrument panel to disengage the snap-clip retainers.
5. Unplug the wire harness connector from the cigar lighter.
6. Unplug the wire harness connector from the auxiliary power outlet.
7. Reverse the removal procedures to install.