Wiper Control Module: Service and Repair

REMOVAL
1. Disconnect and isolate the battery negative cable.

Knee Blocker Remove/Install:

2. Remove the five screws that secure the knee blocker to the lower instrument panel and remove the knee blocker.
3. On club cab models only:

Steering Column Cover Reinforcement Remove/Install - Club Cab Only:

a. Remove the six screws that secure the steering column cover reinforcement to the instrument panel.
b. Remove the steering column cover reinforcement from the instrument panel.

Intermittent Wiper Module Remove/Install:

4. Unplug the wire harness connector from the intermittent wipe module.
5. Disengage the intermittent wipe module snap-fit mounting slot from the blade of the mounting bracket.
6. Reverse the removal procedures to install.