| Standard Hours | Manufacturer Warranty Hours | Skill Level | Notes |
| Tune-Up | 1.4 | 1.0 | B | Includes: R&R Trans Pan, Service Filter And Make All Necessary Adjustments. |
| Flush | 0.8 | 0.0 | B | |
| Diagnose/Test |
| 47RE |
| Electronic Trans, Diagnosis | 1.8 | 0.0 | A | Includes: Time To Hook-Up And Disconnect Test Equipment. Checking System For Fault Codes, Road Test And Hydraulic Pressure Test As Required. |
| Replace |
| A500/42RH, 42RE |
| Complete Assembly Without Transfer Of Parts | 4.1 | 2.9 | B | |
| NOTE |
| With Skid Plate, Add | 0.4 | 0.2 | B | |
| With Dual Exhaust, Add | 0.5 | 0.3 | B | |
| To Flow Check Cooler System, Add | 0.7 | 0.4 | B | |
| To R&R Drive Plate, Add | 0.4 | 0.1 | B | |
| To R&R Torque Converter, Add | 0.2 | 0.2 | B | |
| To R&R Output Shaft Bearing, Add | 0.2 | 0.0 | B | |
| To Reverse Flush Cooler System, Add | 0.8 | 0.4 | B | |
| Complete Assembly With Transfer Of Parts | 4.7 | 3.1 | B | Includes: R&I Transmission. |
| NOTE |
| To Flow Check Cooler System, Add | 0.7 | 0.4 | B | |
| With Skid Plate, Add | 0.4 | 0.2 | B | |
| With Dual Exhaust, Add | 0.5 | 0.3 | B | |
| To R&R Drive Plate, Add | 0.4 | 0.1 | B | |
| To R&R Torque Converter, Add | 0.2 | 0.2 | B | |
| To Flush Cooler Lines, Add | 0.8 | 0.4 | B | |
| To R&R Output Shaft Bearing, Add | 0.2 | 0.0 | B | |
| A518/46RH, 46RE |
| Complete Assembly Without Transfer Of Parts | 4.1 | 2.9 | B | |
| NOTE |
| With Skid Plate, Add | 0.4 | 0.2 | B | |
| With Dual Exhaust, Add | 0.5 | 0.3 | B | |
| To Flow Check Cooler System, Add | 0.7 | 0.4 | B | |
| To R&R Torque Converter Add | 0.2 | 0.2 | B | |
| To R&R Drive Plate, Add | 0.4 | 0.2 | B | |
| To Reverse Flush Cooler System, Add | 0.8 | 0.4 | B | |
| To R&R Output Shaft Bearing, Add | 0.2 | 0.0 | B | |
| Complete Assembly With Transfer Of Parts | 4.7 | 3.1 | B | Includes: R&I Transmission. |
| NOTE |
| With Skid Plate, Add | 0.4 | 0.2 | B | |
| With Dual Exhaust, Add | 0.5 | 0.3 | B | |
| To R&R Torque Converter Add | 0.2 | 0.2 | B | |
| To R&R Drive Plate, Add | 0.4 | 0.2 | B | |
| To Flush Cooler Lines, Add | 0.8 | 0.4 | B | |
| To Flow Check Cooler System, Add | 0.7 | 0.4 | B | |
| To R&R Output Shaft Bearing, Add | 0.2 | 0.0 | B | |
| 47RE |
| Complete Assembly Without Transfer Of Parts | 4.1 | 2.9 | B | |
| NOTE |
| With Skid Plate, Add | 0.4 | 0.2 | B | |
| With Dual Exhaust, Add | 0.5 | 0.3 | B | |
| To Flow Check Cooler System, Add | 0.7 | 0.4 | B | |
| To Reverse Flush Cooler System, Add | 0.8 | 0.4 | B | |
| To Replace Torque Converter, Add | 0.2 | 0.2 | B | |
| To R&R Driveplate, Add | 0.4 | 0.1 | B | |
| To R&R Output Shaft Bearing, Add | 0.2 | 0.0 | B | |
| Complete Assembly With Transfer Of Parts | 4.7 | 3.1 | B | Includes: R&I Transmission. |
| NOTE |
| With Skid Plate, Add | 0.4 | 0.2 | B | |
| With Dual Exhaust, Add | 0.5 | 0.3 | B | |
| To Flow Check Cooler System, Add | 0.7 | 0.4 | B | |
| To Replace Torque Converter, Add | 0.2 | 0.2 | B | |
| To Flush Cooler Lines, Add | 0.8 | 0.4 | B | |
| To R&R Driveplate, Add | 0.4 | 0.1 | B | |
| To R&R Output Shaft Bearing, Add | 0.2 | 0.0 | B | |
| Overhaul/Rebuild |
| A500 42RH, 42RE | 11.4 | 8.3 | A | Includes: R&I Transmission. |
| Note |
| With Skid Plate, Add | 0.4 | 0.2 | A | |
| With Dual Exhaust, Add | 0.5 | 0.3 | A | |
| To Flow Check Cooler System, Add | 0.7 | 0.4 | A | |
| To Reverse Flush Cooler System, Add | 0.8 | 0.4 | A | |
| To Replace Torque Converter, Add | 0.2 | 0.2 | A | |
| To Renew Driveplate, Add | 0.4 | 0.1 | A | |
| A518 46RH, 46RE | 11.4 | 8.3 | A | Includes: R&I Transmission. |
| NOTE |
| With Skid Plate, Add | 0.4 | 0.2 | A | |
| With Dual Exhaust, Add | 0.5 | 0.3 | A | |
| To Renew Driveplate, Add | 0.4 | 0.2 | A | |
| To Flow Check Cooler System, Add | 0.7 | 0.4 | A | |
| To Reverse Flush Cooler System, Add | 0.8 | 0.4 | A | |
| To Overhaul Valve Body, Add | 1.6 | 0.0 | A | |
| To Replace Torque Converter, Add | 0.2 | 0.2 | A | |
| 47RE | 11.4 | 8.3 | A | Includes: R&I Transmission. |
| Note |
| With Skid Plate, Add | 0.4 | 0.2 | A | |
| With Dual Exhaust, Add | 0.5 | 0.3 | A | |
| To Flow Check Cooler System, Add | 0.7 | 0.4 | A | |
| To Reverse Flush Cooler System, Add | 0.8 | 0.4 | A | |
| To Replace Torque Converter, Add | 0.2 | 0.2 | A | |
| To Renew Driveplate, Add | 0.4 | 0.1 | A | |