Instrument Panel Lower Bezel Replacement

REMOVAL

WARNING: ON VEHICLES EQUIPPED WITH AIRBAGS, FAILURE TO TAKE THE PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT AND POSSIBLE PERSONAL INJURY.

1. Disconnect and isolate the battery negative cable.
2. Remove the cluster bezel from the instrument panel.
3. Open the glove box.

Instrument Panel Lower Bezel Remove/Install:

4. Remove the two screws that secure the bottom of the lower bezel to the instrument panel.
5. Remove the four screws that secure the top of the lower bezel to the instrument panel.
6. Pull the bezel away from the instrument panel far enough to access and unplug the wire harness connectors from the cigar lighter, the power outlet, and the passenger airbag disarm switch.
7. Squeeze the ash receiver lamp and hood bracket to remove the unit from the mounting hole in the flame shield.
8. Remove the lower bezel from the instrument panel.
9. Reverse the removal procedures to install. Tighten the mounting screws to 2.2 N.m (20 in. lbs.).