Rear Door: Service and Repair
DOORREMOVAL
1. Remove B-pillar trim. Refer to Trim Panel.
2. Disconnect door wire harness connector.
3. Support door on suitable stand.
4. Using a grease pencil or equivalent, mark hinge position on B-pillar.
Fig. 1:
5. Remove bolts attaching hinge to B-pillar (Fig. 1).
INSTALLATI0N
1. Align and position door on vehicle.
2. Install bolts attaching hinge to B-pillar (Fig. 1) and tighten to 28 N.m (20 ft.lbs.).
3. Connect door wire harness connector.
4. Install B-pillar trim.