Tie Rod: Service and Repair

REMOVAL
1. Raise and support the vehicle.
2. Remove the tire and wheel assembly.
3. Remove outer tie rod end.

Inner Tie Rod:

4. Remove inner tie rod end from the center link.

Center Link & Inner Tie Rod:

INSTALLATION
1. Thread the inner tie rod end into the center link.
2. Tighten the inner tie rod end to 68 Nm (50 ft. lbs.).
3. Install the out tie rod end.
4. Install the tire and wheel assembly.
5. Remove support and lower the vehicle.
6. Set wheel toe pattern. Alignment