License Plate Lamp: Service and Repair

REMOVAL - Base And Standard Bumper
1. Remove license plate.

License Plate Lamp - Base Rear Bumper:

2. Remove screws attaching lamp to bumper.
3. Disconnect lamp wire harness connector.
4. Separate lamp from bumper.

INSTALLATION - Base And Standard Bumper
1. Position lamp in vehicle.
2. Connect lamp wire harness connector.
3. Install screws attaching lamp to bumper.
4. Install license plate.

REMOVAL - Step Bumper

License Plate Lamps - Step Bumper:

1. Remove screws attaching lamp to bumper.
2. Disconnect lamp wire harness connector.
3. Separate lamp from bumper.

INSTALLATION - Step Bumper
1. Connect lamp wire harness connector.
2. Position lamp in bumper.
3. Install screws attaching lamp to bumper.