Side Identification (ID) Lamp

REMOVAL

Side Identification Lamps:

1. Using a flat blade screw driver, carefully pry lamp to disengage clips attaching ID lamp to retainer.
2. Separate ID lamp from retainer.
3. Disengage lamp bulb socket from lamp.
4. Remove screws attaching lamp retainer to rear fender.
5. Separate retainer from rear fender.

INSTALLATION
1. Position retainer on rear fender.
2. Install screws attaching lamp retainer to rear fender.
3. Engage lamp bulb socket to lamp.
4. Position an press ID lamp in retainer.