Repairing Loss of Ignition Run / Start

Name of code: Loss of Ignition Run/Start

NOTE: This code becomes active and stored as soon as the malfunction is detected.

When monitored: Continuously with the ignition on.

Set condition: With ignition on, the ignition run/start circuit voltage is other than expected.

Possible causes:
> Open fused ignition switch output circuit (run/start)
> Open fuse
> Open ignition switch output circuit
> Loose or poor connection at connector terminals
> Faulty ignition switch
> Faulty airbag control module
> Faulty passenger airbag disable switch