With Grab Handle

REMOVAL
1. Pull coat hook open.

Rail Lamp Module - With Grab Handle:

2. Remove screw attaching rail lamp module to roof rail inside coat hook.
3. Holding down grab handle, remove screws attaching rail lamp module to roof rail.
4. Remove rail lamp module from headlining.
5. Disconnect wire connector from body wiring harness.
6. Remove rail lamp module from vehicle.

INSTALLATION
1. Position rail lamp module to vehicle.
2. Connect wire connector to body wiring harness.
3. Position rail lamp module to headlining.
4. Install screws attaching rail lamp module to roof rail behind grab handle.
5. Install screw attaching rail lamp module to roof rail inside coat hook.