Loss of Ignition Run Only (Active)

SYMPTOM
LOSS OF IGNITION RUN ONLY (ACTIVE)

WHEN MONITORED
Continuously with ignition ON.

SET CONDITION
The "Loss of Ignition Run Only" code will set if the voltage on the Fused Ignition Switch Output Run Only circuit falls below 6.0 volts.

POSSIBLE CAUSES
- Ignition switch output circuit open
- Fused ignition switch output circuit shorted to ground
- Fused ignition switch output circuit open
- Ignition switch output (run only) fuse defective
- ACM defective, fused ignition run only shorted
- ACM defective, fused ignition run only open