Loss of Ignition Run/Start (Active)

SYMPTOM
LOSS OF IGNITION RUN/START (ACTIVE)

WHEN MONITORED
Continuously with ignition ON.

SET CONDITION
The "Loss of Ignition Run/Start" code will set if the voltage on the Fused Ignition Switch Output Run/Start circuit falls below 6.0 volts.

POSSIBLE CAUSES
- Ignition switch output Run/Start open
- Fuse (Run/Start) defective
- Fused ignition switch output Run/Start open
- Fused ignition switch output Run/Start shorted
- ACM defective, fused ignition Run/Start open
- ACM defective, fused ignition Run/Start shorted