P0203 Injector # 3 Control Circuit

SYMPTOM
P-0203 INJECTOR #3 CONTROL CIRCUIT

WHEN MONITORED
With battery voltage greater than 12 volts, the auto shutdown relay energized, injector pulse width less than 10ms, and engine speed less than 3000 rpm.

SET CONDITION
This trouble code takes 0.64 to 10.0 seconds to set when no inductive kick is sensed 0.18ms after injector turn off, and with no other injectors on.

POSSIBLE CAUSES
- ASD relay output circuit open
- Auto shutdown relay output circuit open
- Fuel injector #3 defective
- Injector #3 defective
- Inj #3 control circuit wiring harn intermittent defect
- Inj #3 control circuit wiring harn observable defect
- Injector #3 driver circuit open
- Injector #3 driver circuit shorted to ground
- ASD relay output circuit open
- PCM defective
- Injector #3 driver circuit open
- Injector #3 driver circuit shorted to ground