Transaxle Overheats

SYMPTOM:
TRANSAXLE OVERHEATS

POSSIBLE CAUSES
ENGINE IDLE SPEED TOO HIGH (CHECK AIS MOTOR)
ENGINE OVERHEAT
HIGH FLUID LEVEL
INSUFFICIENT CLUTCH PLATE CLEARANCE
TRANS NOT OPERATING IN FEMCC
TRANS NOT SHIFTING INTO OD

REPAIR INSTRUCTIONS:
ENGINE IDLE SPEED TOO HIGH (CHECK AIS MOTOR
Refer to DRIVEABILITY DTCs, and perform CHECKING THE MINIMUM IDLE AIR FLOW to repair failure.
Perform Transaxle 41 TE/AE Verification TEST VER-1A. Verification Test VER-1A - Transmission Control System
ENGINE OVERHEAT
Check Cooling System, and repair as necessary.
Perform Transaxle 41 TE/AE Verification TEST VER-1A. Verification Test VER-1A - Transmission Control System
HIGH FLUID LEVEL
Drain Fluid to proper level.
Perform M-TRANSAXLE 41 TE/AE Verification TEST VER-1A. Verification Test VER-1A - Transmission Control System
INSUFFICIENT CLUTCH PLATE CLEARANCE
Recondition Transaxle.
Perform Transaxle 41 TE/AE Verification TEST VER-1A. Verification Test VER-1A - Transmission Control System
TRANS NOT OPERATING IN FEMCC
Perform "NO EMCC ENGAGEMENT".
Perform Transaxle 41 TE/AE Verification TEST VER-1A. Verification Test VER-1A - Transmission Control System
TRANS NOT SHIFTING INTO OD
Perform " NO UPSHIFTS INTO OVERDRIVE.
Perform Transaxle 41 TE/AE Verification TEST VER-1A. Verification Test VER-1A - Transmission Control System