Coolant Temperature Sensor/Switch (For Computer): Service and Repair

REMOVAL

WARNING: HOT, PRESSURIZED COOLANT CAN CAUSE INJURY BY SCALDING. COOLING SYSTEM MUST BE PARTIALLY DRAINED BEFORE REMOVING THE COOLANT TEMPERATURE SENSOR.

1. Partially drain cooling system.

Engine Coolant Temperature Sensor:

2. Disconnect electrical connector from sensor.
3. Remove sensor from thermostat housing.


INSTALLATION
1. Install sensor.
2. Tighten to 11 N-m (8 ft. lbs.) torque.
3. Replace any lost engine coolant.