Power and Ground Distribution: Specifications

Tighten the screw that secures the PDC to the left front fender wheel housing to 7.9 N.m (70 in. lbs.).

Tighten the nut that secures the eyelet of the battery positive cable take out to the forward stud in the PDC to 8.4 N.m (75 in. lbs.).

Tighten the nut that secures the eyelet of the battery negative cable take out to the rearward stud in the PDC to 9 N.m (80 in. lbs.).

Tighten the two screws that secure the generator cartridge fuse to the input and output bus bars within the PDC to 3.4 N.m (30 in. lbs.).