Loss of Ignition Run/Start (Active)

SYMPTOM
LOSS OF IGNITION RUN/START (ACTIVE)

WHEN MONITORED
Continuously with the ignition on.

SET CONDITION
With ignition on, the ignition run/start circuit voltage is other than expected.

POSSIBLE CAUSES
- Active code present only with PAB ON/OFF SW OFF
- Ignition switch output run/start open
- Fuse # 19 defective
- Fused IGN SW OPT run/start shorted to GND
- Fused ignition SW output run/start open
- Airbag control module defective, fused ignition run/start open
- Airbag control module defective, fused ignition run/start shorted
- PAB ON/OFF switch short to ground