Housing Assembly HVAC

Tighten screws that secure the blower motor housing cover to the heater-A/C housing to 2.2 N.m (20 in. lbs.).

Tighten screws that secure the perimeter of the housing cover to the heater-A/C housing to 2.2 N.m (20 in. lbs.).

Tighten screws that secure the heater-A/C housing cover to the lower housing near the floor outlet to 2.2 N.m (20 in. lbs.).

Tighten the screws that secure floor duct to the bottom of the heater-A/C housing to 2.2 N.m (20 in. lbs.).

Tighten the nut that secures the heater-A/C housing mounting brace to the stud on the passenger compartment side of the dash panel to 11 N.m (95 in. lbs.).

Tighten the nuts onto the heater-A/C housing mounting studs on the engine compartment side of the dash panel to 7 N.m (60 in. lbs.).