Steering Column: Testing and Inspection
IGNITION SWITCHTest And Repair
If the key removal effort is excessive on a vehicle with a automatic transmission first adjust the shift linkage.
If the ignition switch effort is excessive remove the ignition key cylinder from the steering column. Check the turning effort of the key cylinder. If the ignition key cylinder effort is excessive replace the key cylinder. If the ignition key cylinder operates properly look for the following conditions.
Steering Column Flash Removal:
1. Look for rough areas or flash in the casting and if found remove with a file.
2. Remove the link and slider and check the link to see if it is bent. If so replace with a new part.
3. Move the slider in its slot in the sleeve and verify a loose fit over the length of the slot. If the slider binds in the slot at any point lightly file the slider until clearance is achieved.