Recirculation Air Door Replacement

REMOVAL

A recirculation air door and vacuum actuator are used only on models with the optional air conditioning system.

1. Remove the heater-A/C housing from the vehicle, and remove the housing cover. Refer to: "Housing Assembly HVAC : Service and Repair" Service and Repair
2. Remove the recirculation air door actuator from the blower motor housing cover.

Recirculation Air Door Remove/Install:

3. Lift the lower end of the recirculation air door up far enough so that the door lever is clear of the recirculation air intake grille, then twist the door to remove the door pivots from the pivot holes in the blower motor housing cover.
4. Remove the recirculation air door from the blower motor housing cover.
5. Reverse the removal procedures to install.