Generator Cartridge Fuse Replacement

If a generator cartridge fuse fails, be certain to inspect and test the vehicle charging system before replacing the cartridge fuse and returning the vehicle to service. Refer to Diagnosis and Testing in the Charging System for the proper procedures.

REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Unlatch and remove the cover from the Power Distribution Center (PDC).
3. Remove the two screws that secure the generator cartridge fuse to the input and output bus bars within the PDC.
4. Remove the generator cartridge fuse from the PDC.

INSTALLATION
1. Position the generator cartridge fuse onto the input and output bus bars within the PDC.
2. Install and tighten the two screws that secure the generator cartridge fuse to the input and output bus bars within the PDC. Tighten the screws to 3.4 N.m (30 in. lbs.). Do not overtighten.
3. Install the cover onto the PDC.
4. Reconnect the battery negative cable.