Keyless Entry: Testing and Inspection

For testing of the Power Door Lock System, refer to Body Control Module, Testing and Inspection.
Testing and Inspection

As a preliminary diagnosis for vehicles with the power lock and Remote Keyless Entry (RKE) systems (high-line version of the Central Timer Module), note the system operation while you actuate both the Lock and Unlock functions with the power lock switches and the RKE transmitter. Then, proceed as follows:
- If the driver side front door power lock motor fails to unlock following a single press of the RKE transmitter Unlock button, test the driver unlock relay.
- If the entire power lock system fails to function with either the power lock switches or the RKE transmitter, check the fuses in the junction block.
- If the power lock system functions with both power lock switches, but not with the RKE transmitter, see Remote Keyless Entry Transmitter Testing and Inspection.
If the entire power lock system functions with the RKE transmitter, but not with one or both of the power lock switches, see Power Lock Switch Testing and Inspection.
- If one power lock motor fails to operate with both of the power lock switches and/or the RKE transmitter, see Power Lock Motor in the Diagnosis and Testing.

If the problem being diagnosed involves only the RKE horn chirp or panic mode features, test the horn relay and/or headlamp relay. If both of these relays check OK, further diagnosis should be performed using a DRB III scan tool.