Procedures

REAR DOOR

REMOVAL
1. Remove B-pillar trim.
2. Disconnect door wire harness connector.
3. Support door on suitable stand.
4. Using a wax crayon or equivalent, mark hinge position on B-pillar.

Fig. 44 Rear Door Hinge:

5. Remove bolts attaching hinge to B-pillar.

INSTALLATION
1. Align and position door on vehicle.
2. Install bolts attaching hinge to B-pillar.

Tighten bolts to 28 Nm (20 ft.lbs.) torque.

3. Connect door wire harness connector.
4. Install B-pillar trim.