Rear

REMOVAL
1. Raise and support vehicle.
2. Remove links upper mounting nuts and bolts.
3. Remove the cotter pins and nuts from the links at the stabilizer bar.
4. Separate the links from the stabilizer bar with Puller C-3894-A and remove the links.





5. Remove stabilizer bar retainer bolts and retainers.
6. Remove stabilizer bar and remove bushings.

INSTALLATION
1. Install stabilizer bar bushings.
2. Install the stabilizer bar and center it with equal spacing on both sides.
3. Install stabilizer bar retainers and tighten bolts to 54 Nm (40 ft. lbs.).
4. Install link on the frame and the stabilizer bar. Install mounting bolts and nuts.
5. Remove support and lower vehicle.
6. Tighten stabilizer link upper nuts to 95 Nm (70 ft. lbs.).
7. Tighten stabilizer link lower nuts to 68 Nm (50 ft. lbs.) and install a new cotter pins.