Overrunning Clutch Case to Rear Carrier Case (Reseal)

1. Remove rear drive line module assembly from vehicle.
2. Drain fluid from overrunning clutch case.

Fig. 45:

3. Remove overrunning clutch case to rear carrier bolts.

Fig. 46:

4. Separate overrunning clutch case from rear carrier unit.
5. Clean and inspect sealing surfaces.
6. Apply a bead of Mopar Gasket Maker, or equivalent to sealing surfaces and reassemble.
7. Reinstall rear drive line module assembly.
8. Check and fill fluid levels as required. Use only MOPAR TYPE 7176 Automatic Transmission Fluid or equivalent in the overrunning clutch housing.