Overrunning Clutch Cover

OVERRUNNING CLUTCH COVER (RESEAL)
1. Remove rear drive line module assembly from vehicle.

Fig. 44:

2. Remove overrunning clutch cover assembly mounting bolts.
3. Lift overrunning clutch cover off of overrunning clutch housing.
4. Clean and inspect sealing surfaces.
5. Apply Mopar Gasket Maker or equivalent and reinstall cover and vacuum hose clip. When installing cover be sure that the overrunning clutch fork engages into the overrunning clutch dog.
6. Install overrunning clutch cover mounting bolts and tighten bolts to 28 Nm (250 inch lbs.).
7. Reinstall rear drive line module assembly into vehicle.
8. Check and fill fluid levels as required. Use only MOPAR TYPE 7176 Automatic Transmission Fluid or equivalent in the overrunning clutch case.