Headlamp: Service and Repair

Minor amounts of fogging may occur around the edges of the headlamp lens when exposed to humid conditions. This is considered normal. The fogging will dissipate with increased ambient temperature or headlamp usage.

REMOVAL
1. Release hood latch and open hood.
2. From inside engine compartment, remove nuts holding headlamp module to radiator closure panel.
3. Remove screw holding top of module to closure panel.

Headlamp Module - Typical:

4. Remove headlamp module from radiator closure panel.
5. Disconnect wire connectors from back of headlamp module.
6. Separate headlamp module from vehicle.

INSTALLATION
1. Place headlamp module in position on vehicle.
2. Connect wire connectors into back of headlamp module.
3. Place headlamp module in position on radiator closure panel.
4. Install nuts to hold headlamp module to radiator closure panel.
5. Install screw to hold top of module to closure panel.
6. Verify headlamp operation and alignment.