Seat Belt Control Timer Module Message Mismatch (Stored)

Test 14:

SYMPTOM
SEAT BELT CONTROL TIMER MODULE MESSAGE MISMATCH (STORED)

TEST NOTE
This symptom is diagnosed using the test CLUSTER MESSAGE MISMATCH (STORED).

WHEN MONITORED
Continuously after the ignition is ON.

SET CONDITION
If the seat belt lamp request (ON or OFF) from the ACM does not match the cluster seat belt lamp state (ON or OFF) for 2 continuous seconds the code will be set.

POSSIBLE CAUSES
- Stored code has become active
- Stored code has not been reproduced