Headlamp: Service and Repair

Headlamp:

REMOVAL
1. Release hood latch and open hood.
2. Remove push-in fastener attaching seal to radiator closure panel.
3. Remove park and turn signal lamp.
4. Remove screws attaching top of headlamp module to radiator closure panel.
5. From behind front bumper, remove screws attaching bottom of headlamp module to radiator closure panel.
6. Separate headlamp module from radiator closure panel.

Headlamp Sport:

7. Disengage wire connector from headlamp bulb(s).
8. Separate headlamp module from vehicle.

INSTALLATION
1. If removed, install headlamp bulb(s).
2. Connect headlamp bulb wire connector(s).
3. Position headlamp in radiator closure panel.
4. From behind front bumper, install the screws attaching bottom of headlamp module to radiator closure panel.
5. Install the screws attaching top of headlamp module to radiator closure panel.
6. Install park and turn signal lamp.
7. Install push-in fastener attaching seal to radiator closure panel.
8. Close hood.