P0340 No Cam Signal at PCM

SYMPTOM
P-0340 NO CAM SIGNAL AT PCM

WHEN MONITORED
Ignition ON.

SET CONDITION
If 96 crank signals are counted and no signal from the cam position sensor is present the code Will set.

POSSIBLE CAUSES
- No start condition present
- 5-volt supply circuit bad wire
- Camshaft position sensor ground circuit open
- CMP sensor connector observable defect
- Wiring and connectors observable defect
- Camshaft position sensor signal circuit open
- CMP sensor signal circuit shorted to ground
- CMP sensor signal circuit shorted to sensor ground
- CMP sensor signal ckt shorted to 5-volt supply ckt
- CAM sensor defective
- Camshaft position sensor defective
- Crank sensor defective
- Inactive trouble codes
- Powertrain control module defective