P1763 Governor Pressure Sensor Volts Too High

SYMPTOM
P-1763 GOVERNOR PRESSURE SENSOR VOLTS TOO HIGH

WHEN MONITORED
Continuously with the key on and engine running.

SET CONDITION
The voltage from the Governor Pressure Sensor is above 4.89 volts for 8.5 seconds.

POSSIBLE CAUSES
- No possible causes remaining
- 5-volt supply circuit open
- Governor pressure sensor ground circuit open
- Governor pressure sensor ground circuit open
- Gov pressure sensor signal ckt short to voltage
- Gov pressure sensor wiring harness int def
- Gov pressure sensor wiring harness obs def
- Governor pressure sensor signal circuit open
- Governor pressure sensor signal circuit open
- Governor pressure signal ckt short to voltage
- Governor pressure/temperature sensor defective
- Powertrain control module defective
- Powertrain control module defective
- Pressure/temperature sensor defective
- Trans harness/solenoid assembly defective (v)
- Trans harness/solenoid assembly defective (v)
- Trans harness/solenoid assembly def (gnd ckt)
- Trans harness/solenoid assembly def (gnd ckt)
- Trans harness/solenoid assembly def (sig ckt)
- Trans harness/solenoid assembly def (sig ckt)