A/C Discharge Hose/Line

Tighten the Compressor mounting screw to 22 Nm (200 in. lbs.).

Tighten the Condenser inlet mounting screw to 22 Nm (200 in. lbs.).

Tighten the threaded fitting on the suction line jumper to 47 Nm (420 in. lbs.).

Tighten the threaded fitting on the rear heater-A/C unit suction line to 47 Nm (420 in. lbs.).

Tighten the threaded fitting on the rear heater-A/C unit liquid line fitting to 27 Nm (244 in. lbs.).

Tighten the underbody plumbing bundle mounting screws to 6.7 Nm (60 in. lbs.).

Tighten the underbody plumbing bundle mounting nut to 3.3 Nm (30 in. lbs.).