Hazard Warning Switch

Tighten the two screws that secure the multi-function switch to the steering column to 6 Nm (53 in. lbs.).

Tighten the screw that secures the two halves of the steering column wire harness connector to each other to 4.5 Nm (40 in. lbs.).

Tighten the two screws that secure the upper shroud to the steering column to 1.4 Nm (12 in. lbs.).

Tighten the two screws that secure the lower steering column shroud to the upper shroud to 3.4 Nm (30 in. lbs.).

Tighten the nut that secures the steering wheel to the upper steering column shaft to 61 Nm (45 ft. lbs.).