Instrument Cluster Housing Rear Cover Replacement

CLUSTER HOUSING REAR COVER

REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the instrument cluster from the instrument panel. Refer to: "Instrument Panel, Gauges and Warning Indicators : Instrument Panel : Service and Repair" Service and Repair

Cluster Housing Rear Cover Remove/Install:

3. Remove the six screws that secure the rear cover to the back of the cluster housing.
4. Remove the rear cover from the back of the cluster housing.

INSTALLATION
1. Position the rear cover to the back of the cluster housing.
2. Install and tighten the six screws that secure the rear cover to the back of the cluster housing. Tighten the screws to 2.2 Nm (20 in lbs).
3. Install the instrument cluster onto the instrument panel. Refer to: "Instrument Panel, Gauges and Warning Indicators : Instrument Panel : Service and Repair" Service and Repair
4. Reconnect the battery negative cable.