Air Temperature Sensor ( Ambient / Intake ): Service and Repair

IAT Sensor Location:

The IAT sensor is located in the left/rear side of the intake manifold.

REMOVAL
1. Disconnect electrical connector from IAT sensor.

IAT Sensor Removal/Installation:

2. Remove IAT sensor from intake manifold.
3. Discard sensor O-ring.

INSTALLATION
1. Clean sensor mounting hole of rust or contaminants.
2. Install new O-ring to sensor. Apply clean engine oil to sensor O-ring and sensor threads.
3. Install IAT sensor into intake manifold. tighten to 14 Nm (10 ft. lbs.) torque.
4. Connect sensor electrical connector.