No Cluster CCD Message (Stored)
SYMPTOMNO CLUSTER CCD MESSAGE (STORED)
TEST NOTE
This symptom is diagnosed using the test CLUSTER MESSAGE MISMATCH (STORED).
WHEN MONITORED
Continuously when the ignition is ON.
SET CONDITION
The cluster transmits an airbag warning lamp message on the CCD bus one time every second. The ACM monitors the CCD bus for the airbag warning lamp message. If the ACM fails to see the status message for 5 continuous seconds the code will be set.
POSSIBLE CAUSES
- Stored code has become active
- Stored code has not been reproduced