Instrument Cluster Housing Replacement

CLUSTER HOUSING

REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the instrument cluster from the instrument panel. Refer to: "Instrument Panel, Gauges and Warning Indicators : Instrument Panel : Service and Repair" Service and Repair
3. Remove all of the incandescent illumination lamp and indicator lamp bulb and bulb holder units from the cluster electronic circuit board. Refer to: "Instrument Panel, Gauges and Warning Indicators : Instrument Panel : Service and Repair" Service and Repair
4. Remove the lens and hood unit from the cluster housing. Refer to: "Instrument Panel, Gauges and Warning Indicators : Instrument Panel : Service and Repair" Service and Repair
5. Remove the rear cover from the cluster housing. Refer to: "Instrument Panel, Gauges and Warning Indicators : Instrument Panel : Service and Repair" Service and Repair

INSTALLATION
1. Install the rear cover onto the cluster housing. Refer to: "Instrument Panel, Gauges and Warning Indicators : Instrument Panel : Service and Repair" Service and Repair
2. Install the lens and hood unit onto the cluster housing. Refer to: "Instrument Panel, Gauges and Warning Indicators : Instrument Panel : Service and Repair" Service and Repair
3. Install all of the incandescent illumination lamp and indicator lamp bulb and bulb holder units onto the cluster electronic circuit board. Refer to: "Instrument Panel, Gauges and Warning Indicators : Instrument Panel : Service and Repair" Service and Repair
4. Install the instrument cluster onto the instrument panel. Refer to: "Instrument Panel, Gauges and Warning Indicators : Instrument Panel : Service and Repair" Service and Repair
5. Reconnect the battery negative cable.