Air Bag

Tighten the two driver side airbag module mounting screws to 10.2 Nm (90 in lbs).

Tighten the trim cover retainer mounting nuts on the airbag housing studs to 10 Nm (90 in lbs).

Tighten the five screws that secure the passenger side airbag module front and rear mounting brackets to the instrument panel to 9 Nm (80 in lbs).

Tighten the four screws that secure the two plastic support brackets of the passenger side airbag door panel outlet housing to the glove box opening upper reinforcement to 2.2 Nm (20 in lbs).